Breaker Tools & Wear Parts
Chisels, moil points, blunt tools, bushings, retaining pins, seal kits and wear plates for hydraulic breakers. The consumable side of breaker ownership, and usually the larger half of its cost.
Features
- Moil point for penetration in trenching, flat chisel for splitting along a line, blunt tool for secondary boulder breaking.
- Tool bushings and retaining pins supplied as matched sets, since a worn bushing lets the tool wander and crack.
- Seal kits for the back head and percussion piston, with the nitrogen charge specification stated.
- Wear plates for the housing, replaced before they let the percussion unit move within the box.
- Tools identified by diameter and working length, taken from the breaker's own data plate rather than guessed.
Specifications
| Figure | Typical range | Unit | Why it matters |
|---|---|---|---|
| Tool diameter | 40 - 210 | mm | The primary identifying dimension |
| Tool type | moil / flat chisel / blunt / pyramid | Material and task decide the shape | |
| Bushing set | upper and lower, per model | Worn bushings crack tools quickly |