Demolition & Sorting Attachments
Multi-Processor with Interchangeable Jaws
One attachment body taking several jaw sets, so a contractor can move between concrete crushing, steel shearing and tank cutting without buying three tools.
Features
- Common body and cylinder with jaw sets changed by pin and bolt in the workshop.
- Jaw options typically covering pulveriser, combi cutter, steel shear and tank cutter.
- Continuous hydraulic rotation for positioning the jaw against a structure at any angle.
- Regeneration circuit that speeds the closing stroke until resistance builds.
- Justified where a project has distinct phases; a single-purpose tool is cheaper if only one phase exists.
Specifications
| Figure | Typical range | Unit | Why it matters |
|---|---|---|---|
| Carrier operating weight range | 15 - 45 | t | Body plus heaviest jaw set must suit the machine |
| Jaw sets available | pulveriser / combi / shear / tank cutter | Defines which project phases one body covers | |
| Jaw opening | 700 - 1 400 | mm | Varies with the jaw set fitted |
| Rotation | 360 degrees hydraulic | Needed for overhead and angled work | |
| Jaw change time | workshop hours per change | h | Downtime between project phases |