Demolition & Sorting Attachments
Sorting & Demolition Grab
Twin-shell hydraulic grab with rotation, for selective demolition, sorting mixed waste and loading skips and hoppers. Controlled placement rather than bulk movement.
Features
- Two shells closing on the load, with tine or plated shells depending on whether the material is rubble or bulk.
- Continuous hydraulic rotation for accurate placement into skips and hoppers.
- Reinforced shell edges and replaceable tips for repeated contact with concrete and steel.
- Cylinder protection inside the shell profile, since exposed rams do not survive demolition work.
- Available on a quick coupler so the carrier can switch between grab and breaker during a shift.
Specifications
| Figure | Typical range | Unit | Why it matters |
|---|---|---|---|
| Carrier operating weight range | 8 - 35 | t | Grab mass plus load at reach |
| Shell capacity | 0.15 - 1.20 | m3 | Volume per grab cycle |
| Maximum jaw opening | 900 - 2 200 | mm | Size of section or bundle it can take |
| Rotation | 360 degrees hydraulic | Placement accuracy into containers | |
| Required oil flow | 60 - 180 | l/min | Cycle speed and rotation together |