Forks, Grabs & Handling Attachments
Bale Grab & Spike
Handling attachment for round and square bales on loaders and telehandlers, in grab, spike or soft-hand form depending on whether the bale is wrapped.
Features
- Soft-hand grab arms that hold a wrapped silage bale without puncturing the film.
- Spike version for straw and hay where wrap damage is not a concern.
- Square bale forks for stacking, with tine spacing matched to the bale dimension.
- Capacity rated for double bale handling on the larger models.
- Mounted on the carrier's standard plate so it changes out with the bucket.
Specifications
| Figure | Typical range | Unit | Why it matters |
|---|---|---|---|
| Bale type | round wrapped / round dry / square | Wrap damage decides grab or spike | |
| Maximum opening | 1 000 - 2 000 | mm | Must clear the bale diameter |
| Rated capacity | 800 - 2 400 | kg | Wet silage bales are far heavier than straw |
| Bales per lift | 1 - 2 | count | Throughput in a clamp or stack |
| Attachment mass | 180 - 600 | kg | Counts against the carrier's payload |
| Required oil flow | 20 - 60 | l/min | Arm closing speed |