Forks, Grabs & Handling Attachments
Timber & Log Grab
Opposed-tine grab with rotation for handling logs, brash and timber from irregular stacks, mounted on an excavator, loader or forestry crane.
Features
- Curved opposed tines that close around round timber without needing a flat presentation face.
- Continuous hydraulic rotation to align with a log in the stack rather than repositioning the machine.
- Sharp tine tips that penetrate a stack to pick a single stem.
- Cylinder protection inside the tine profile against strike from timber and stone.
- Available as a grapple with an integrated rotator and link, or as a coupler-mounted tool.
Specifications
| Figure | Typical range | Unit | Why it matters |
|---|---|---|---|
| Grab area | 0.10 - 0.60 | m2 | Volume of timber per grab |
| Maximum opening | 900 - 2 000 | mm | Must exceed the stem bundle diameter |
| Carrier operating weight range | 3 - 25 | t | Grab mass plus load at reach |
| Rotation | 360 degrees hydraulic | Aligning with stems in a stack | |
| Required oil flow | 40 - 120 | l/min | Grab and rotator together |