Buckets & Ground-Engaging Attachments
Ditch Cleaning & Tilt Bucket
Wide, shallow bucket without teeth for grading, trimming batters and cleaning ditches, available with hydraulic tilt through roughly 45 degrees each way.
Features
- Wide, low-profile shell that leaves a smooth finished surface rather than a toothed one.
- Hydraulic tilt to either side, so slopes and batters can be finished without repositioning the machine.
- Drain holes in the base to release standing water when cleaning ditches.
- Bolt-on straight cutting edge that can be reversed and replaced as it wears.
- Requires an auxiliary hydraulic line on the carrier for the tilt function.
Specifications
| Figure | Typical range | Unit | Why it matters |
|---|---|---|---|
| Cutting width | 1 200 - 2 400 | mm | Coverage per pass when grading |
| Capacity, heaped | 0.20 - 0.90 | m3 | Shallow profile trades volume for finish |
| Tilt angle | 45 each side | degrees | Batter and slope work without repositioning |
| Required oil flow | 20 - 60 | l/min | Tilt cylinders need an auxiliary circuit |
| Bucket mass | 180 - 900 | kg | Affects reach with a long dipper |
| Carrier weight class | 5 - 25 | t | Wide buckets load the linkage laterally |