Buckets & Ground-Engaging Attachments
General Purpose Digging Bucket
Standard excavator bucket for soil, sand, gravel and mixed spoil, with a profile that fills easily and releases cleanly. The bucket most machines spend most of their hours on.
Features
- Curved profile with a low entry angle so the bucket fills through the first part of the curl.
- Bolt-on cutting edge and replaceable side cutters that protect the shell rather than the shell wearing out.
- Hammerless tooth system as standard, so tips change with a hand tool.
- Side plates and wear strips positioned where spoil actually scours the shell.
- Sized so a full bucket stays within the carrier's lift chart at working reach, not just close in.
Specifications
| Figure | Typical range | Unit | Why it matters |
|---|---|---|---|
| Capacity, heaped | 0.30 - 1.80 | m3 | Volume per pass |
| Cutting width | 700 - 1 800 | mm | Trench and face width |
| Carrier weight class | 6 - 30 | t | Matched shell thickness and pin sizing |
| Bucket mass | 220 - 1 500 | kg | Reduces available lift at reach |
| Tooth count | 3 - 6 | count | Penetration versus a clean trench bottom |
| Hitch interface | pin-on / quick coupler | Fit to the existing machine |