Earthmoving & Construction Tyres
Grader Tyre
G-code tyre for motor graders, where the tyre has to hold a line under side load from the blade without tearing the surface it just finished.
Features
- Shallow G2 pattern for finishing work, deeper G3 where the machine also works loose material.
- Pattern designed to resist side slip when the blade is angled and loaded.
- Smooth self-cleaning tread that leaves the graded surface intact rather than marking it.
- Bias construction common on graders for sidewall strength against the windrow.
- Front and rear positions can take different codes depending on how the machine is used.
Specifications
| Figure | Typical range | Unit | Why it matters |
|---|---|---|---|
| Size designation | 14.00-24 / 17.5-25 | Grader rim sizes are specific | |
| Industry tread code | G2 / G3 | Finishing versus loose-material work | |
| Ply rating | 12 PR - 16 PR | Side load from the blade is high | |
| Tread depth, new | 20 - 35 | mm | Life against surface abrasion |
| Construction | bias / radial | Sidewall resistance to windrow contact | |
| Inflation pressure | 2.5 - 4.5 | bar | Affects blade stability and surface marking |