Oil Analysis & Lubrication Planning
Bulk Storage and Dispensing Setup
Tanks, bunding, filtration, meters and reels specified around a depot's actual consumption, so oil arrives clean and is dispensed without cross-contamination.
Features
- Filtration on the fill line is what stops new oil arriving dirtier than the target cleanliness of the machines it goes into.
- Dedicated reels and colour-coded nozzles per product prevent the cross-contamination that undoes a consolidation exercise.
- Metering at the point of use gives consumption per machine, which is the figure that makes an oil budget meaningful.
- Bunding and spill containment are usually set by the site's own permissions, and they decide tank layout.
- The consumption figures behind the sizing come from the fleet, not from us.
Specifications
| Figure | Typical range | Unit | Why it matters |
|---|---|---|---|
| Products stored | engine oil, hydraulic oil, coolant | each needs its own tank, line and nozzle | |
| Tank capacity | 1 000 - 10 000 | l | sized on consumption and delivery quantity |
| Fill-line filtration | 10 | micrometre | new oil is frequently dirtier than the target |
| Dispensing points | 4 reels with meters | decides workshop flow and per-machine records | |
| Bunded volume | 110 of largest tank | % | normally set by the site's own consent conditions |